A control key is required to install or remove an interchangeable core from a housing or lever. The control key is identified by having "CONTROL" stamped on the bow. How to install and remove an i...
Choose the appropriate full size control key from the selection below.
Classic Conventional Key Blanks and Cut Keys
Part Number
Description
Key Blanks
35-056
Control
Standard bow, embossed both sides
35-076
Standard bow, unembossed both s...
There are two parts that can be referred to as control pins for a 23-030 (FSIC core).C603-967 is the lower control pin that sits in the seventh hole of the FSIC plug. (part B in exploded view) ...
A lock specified by a cylinder suffix BDC will be supplied with a disposable small format construction core, see Figure 1 below. There is no metal key but instead the BDC cylinder has a ...
A small format disposable core is used as a SFIC construction core that is for low security applications and can be thrown in the waste bin after use.
Schlage only offers a limited number of keyways that match the BEST sections. Available in keys and cores.Specify keyway using the B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB =...
Conventional Cylinders - A conventional cylinder is one that requires some breakdown of the lock in order to be removed.
These are the most commonly used cylinders sometimes called key-in-lever...