Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Ic core housing ”

Resolution: For ND Locks shipping prior to January 30, 2017:The springcage(s), lever, and core driver will need to be changed. Depending on the function the components below are required.Outside spring c...:

Is the C987 a small format or full size core?

Resolution: The "C" indicates small format IC core, which is the only core style Falcon products. The C987 will be provided less core unless -6, or -7 suffix is specified (6 or 7 pin core) Example:...:

What is the part number for a control pin for a 23-030?

Resolution: There are two parts that can be referred to as control pins for a 23-030 (FSIC core).C603-967 is the lower control pin that sits in the seventh hole of the FSIC plug. (part B in exploded view) ...:

Will Falcon B locks prepped for BD accept a 6 or 7 pin core?

Resolution: The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core). The tailpiece shown below is used for bo...:

Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?

Resolution: The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.:

Will the SFIC mortise housing accept both six and seven pin cores?

Resolution: Yes. Both Schlage and Falcon SFIC mortise housings will accept 6 and 7 pin cores with no additional parts.:

How can you tell the difference between the FSIC and SFIC cores?

Resolution: There are several ways to spot differences, see Figure 1, but the easiest is to look at the face of each core. The face of both cores looks like a "figure 8". With small format, bo...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Ic core housing ”

RELATED FAQS