Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
hub connect deadbolt
”
RELATED FAQS
Question
Answer
What parts are modified when ordering an ND extended lock?
Resolution:
Only the chassis components are modified for thicker door applications, the lever and spindle assemblies remain intact. The following parts may be modified depending on the function of the lock ...:
What parts do I need to convert my AL lock to fit a 2" thick door?
Resolution:
Part required by function:2 each A700-043 driver & A700-034** lever insert in addition to the chassis parts below:AL10S – 2 hubs A700-028AL25D – 2 hubs 1 A700-028 (inside), 1 A700-030 (outside)...:
Why is the lever binding on LV9000 locks?
Resolution:
Doors that may be slightly under 1 3/4" thick may experience binding. To resolve simply remove the spindle springs and discard. Alternative solution is to install the OSU ferrule kit (L583-347)....:
How do you remove an AL lock from a door?
Resolution:
AL-Series and discontinued D Lever-Series locks use castle nuts to hold the chassis to the spring cages and to keep the chassis positioned in the door. This causes confusion at times when the lock ...:
What K hub will work for 19-R or 19V using a Simplex LP1010?
Resolution:
The LP1000 series Kabba Simplex trim will not work with the 19 series devices.: