Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ HD-QELA CONVERSION KIT ”

RELATED FAQS

Question
Answer
Can a Von Duprin 996L trim be converted to E996L trim?
A E996 conversion kit is required to convert the 996L/L-BE trim to E996L/L-BE electric trim. 050672-00 is the electric conversion kit for 996L rim or vertical rod exit device. 050673-00 is the ...
Is there a conversion kit to make 94/95 devices into a QEL?
Yes.    Required   Series 94 or 95 Fire or Panic 3FT/4FT or 2 ft 6 in / 2 ft 10 in Finish    Optional LX switch &nbs...
Is there a conversion kit to add Electronic Dogging (ED) or Electric Latch Retraction (EL) to a 1690 or 1790 in the field?
There is no conversion kit to add EL or ED to an existing 1690 or 1790 series device. All of the components are built into the device, since the device does not have a separate baseplate.&n...
Do we have conversion instructions for the E996 when shipping conversion kits?
We ship the standard installation instructions because it contains enough information to show how to convert the trim from mechanical to electrical.
Does EL conversion kit for Von Duprin exit devices contain mechanism cover plate?
The conversion kit does not contain a new mechanism case cover plate.  If a cover plate is desired you would need the Fire or Less Dogging Cover Plate for EL conversion kit and panic cover plate fo...
What is the part number for the E996L rim conversion kit?
The 050672 is the part number for rim or vertical rod device and 050673 for the mortise device.
What is the part number for QEL94/95 inpact conversion kit?
The part will be configured as CONVERT.XXXX part numbers. The customer need to specify the following criteria. Required:   Series 94 or 95, Fire or Panic , 3 feet/4feet or 2 feet 6 inches/2 feet...
Can you use a CD conversion kit on a 22 device?
Cylinder dogging CD is not available with 22 series exit device.
Do we offer HD-QEL?
We offer a couple different HD-QEL options:Hex key dogging (HD) is now available with Von Duprin non fire rated QEL33A/35A/98/99 electric exit devices that were shipped after De...
What is the part number for the HD EL conversion kit for Von Duprin devices?
HD-EL conversion kit for 3 feet exit device is 050384-00 and for 4 feet is 050385-00.
Is there a Von Duprin delay egress Chexit conversion kit?
There is no conversion kit for Von Duprin Chexit device.  If delayed egress Chexit device is required, the entire device must be replaced.
Can you convert the EL33A/35A or EL98/99 series exit device to the QEL device?
The Von Duprin EL33A/35A/98/99 device can be converted to the QEL device by getting the correct sized QEL baseplate conversion kit. The existing PS914 or PS873 power supply can be used. ...
Is there a conversion kit to electrify the LP373L lever control?
There is not a conversion kit to electrify the LP373L lever control.  You need to order a complete E-LP373L-BE control through Engineering Specials.
What is the part number for hex dogging conversion kit for a 99 device?
The part number for hex dogging conversion kit for 99 devices is 050114.
Do we offer a parts pack for modular mortise or rim cylinder?
See descriptions for the 09-992 thru 09-997 parts kits for modular mortise cylinders.  The 09-998 is a kit for a rim cylinder.      
Does Von Duprin offer a classroom security option with visual status indication?
Von Duprin offers two options:   The CDSI/HDSI Dogging Indicator provides an at-a-glance verification of the status of the door from inside of the room. Visible “LOCKED” and “UNLO...
Does Schlage offer ND conversion kits to convert to Classroom Security function?
Conversion kits are available to convert many popular functions.Conversion kits manufactured on or after January 30, 2017 will have the new enhanced ND spring cage, lever, plunger and buttonCo...
For all available ND Series Conversion Kit part numbers, click here.
Can I change an AD lock from an 8 "AA" battery pack to a 4 "AA" battery pack?
The AD lock  battery pack type can be changed following this procedure:1. Disconnect the existing battery pack2. Depress and hold the SCHLAGE button for a few seconds to drain off any residual...
What is the part number for the 99L to 99L-2 kit?
You need to purchase the 050388 (RHR) or 050389 (LHR) and specify the finish.
Does Falcon offer an EL conversion kit for the 24 and 25 series exit devices?
Yes, part numbers for Falcon electric latch retraction EL conversion kits are as follows: 650147 for a 3' device. 650148 for a 4' device. 
Can the EL or QEL conversion kit be used on the old Von Duprin 33/35 exit device?
Current EL and QEL baseplate conversion kits can be used on all latching types of the 33/35 series (non "A" version which were manufactured prior to 2003).  At one time, the obsolete black EL ...
Is there an EL conversion kit for the Falcon 2390 exit device?
There is no EL conversion kit for a 2390, the device will need to be replaced.
Can you cut the EL conversion kit - 3' base plate to fit a 30" 9947 device?
You need to order the EL98/9947 or 3'  EL conversion kit.  This will fit on 28 1/8" minimum door opening on two vertical x vertical rod device doors.
What back plate conversion kit is required for the 88 with the 373L trim?
Attached tables provide the back plate conversion kit for all 88 series Exit devices. 88 Back plate conversion Chart
Can you field install a RX switch on the 24/25 device?
The RX switch can be installed at the factory when device is ordered or in the field with part# 650359-00. Installation instructions here will show how the RX swi...
CONVERSION KIT
CK
Can the Von Duprin EL option be added to any existing 98/99 device?
The Von Duprin EL option can be added to any existing 33A/35A, 98/99 series exit devices. 
Is there a Von Duprin conversion kit to change mechanical to electric latch retraction EL in the field?
Followings are the list of the electric latch retraction EL/HDEL (hex dogging), QEL (quiet) kits: 114317-00 QELA Mod. Conv. Kit 040061-00 QELA Mod. Conv. Kit...