Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ HARDWIRE ALARM KIT ”

Resolution: The current draw of a Von Duprin exit alarm ALK is .25 amp when alarm is activated.:

If using the alarm kit-ALK with the 99 device what power supply is needed?

Resolution: Exit alarm ALK operates with 9VDC battery and doesn't required a power supply.If you choose to hard wire the exit alarm ALK use the PS902 power supply.Exit alarm ALK requires 24VDC regulated power ...:

What cylinder is used in the Falcon 24/25 exit alarm kit?

Resolution: The Exit Alarm takes a 1 1/8" Mortise cylinder with a straight cam. See first page of Exit Alarm inst below. Exit Alarm inst:

Is there an Exit Alarm Retrofit Kit (EAK) for the 19 series?

Resolution: These kits for the 19 Series were discontinued June 11th, 2012 when the updated alarm kit for the 24/25 series was released. Prior to discontinuation, it was o...:

What is the part number for the EAK PCB only for Monarch Falcon devices?

Resolution: This circuit board will NOT work on the updated 24/25 Alarm Kits that released June 11th, 2012.:

Can the Von Duprin ALK alarm kit be operated with 12 volts DC?

Resolution: No, the Von Duprin ALK alarm kit can only be operated with a 9 volt battery or 24 volts DC hard-wired power. :

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ HARDWIRE ALARM KIT ”

RELATED FAQS