handpunch modem error

RELATED FAQS

Question
Answer
If a hand reader has an ethernet or modem card installed, the RS-232 port will be automatically configured as a printer output and RS-232 option removed from the SET SERIAL menu.  In order to ...
Older units with 6 digit serial numbers dating before July 2004 will require a main board change with a change in the camera.
The following technical note describes in detail the installation process for upgrading a biometric F-Series HandKey or a biometric F-Series HandPunch with a modem communications mod...
When you see an Error 64 on a HandKey or a HandPunch, it may mean that the lithium battery is low or there is a disconnect with main board.  The first step is to replace the lit...