Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ handle lock out ”

RELATED FAQS

Question
Answer
What is the ME9453?
At one time we offered a 9453 function in several different lever, knob and grip handleset designs. A wide variety of trim offerings were available. The mortise lockcase was a smaller version of th...
What is the part number for the SFIC tail piece for a W lock?
Q330-168 SFIC Tailpiece (throw member for levers) Q330-169 SFIC Tailpiece (throw member for knobs) 
What backsets are available on Schlage and Falcon locks?
SCHLAGE locks are available with the following backsets: Lock Series Lock Type                 ...
Why does my 7500 retract the latch bolt but not re-lock the trim?
The Von Duprin 7500 mortise lock body ships in the NL mode.  Either the function of 7500 lock body has not been changed to the Classroom function or the NL Drive screw is not all the way down. Step...
  Tips for changing the function: The NL Drive screw will not be visible when lock body is set to Classroom function There is locktite on the screw that makes it seem like its turned down enou...
Can the A-series knob be used on a D-series lock?
The knobs on these products are not interchangeable with each other.
What is the center to center for the Falcon H lock?
The dimension between the center of the deadbolt bore and the knobset bore is 4".  See template FH100 attached here for more dimensions.