Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
hand read break compliance
”
RELATED FAQS
Question
Answer
What is the standard memory level for a biometric F-series HP-3000-E-XL?
Resolution:
The biometric F-series HandPunch 3000-XL, the HandPunch 3000-E-XL, and the HandPunch 4000 are all "Break Compliant" hand reader models. Each of these hand readers utilizes an Extended Us...:
What is the "HOST BITS" setting on a Hand Reader with an Ethernet Module?
Resolution:
Handreaders require a static (fixed) IP address; this means you have to set its IP address, subnet mask and default gateway.These are usually assigned or issued by your local network administrator....:
What are the steps I need to take in order to do a card emulation test between biometric hand readers?
Resolution:
If an access control system is not available to test the card output on a hand reader, this card emulation test can be done to verify the card format is correct. These steps will guide you in...:
What happens when you assign all of the password menus on the F and E series readers the same password?
Resolution:
The 5 Command Groups will be combined by assigning them the same password starting with those in password menu 5 and then ending with those in password menu 1. In this case, the command choic...: