Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ h series lockset ”

RELATED FAQS

Question
Answer
What is an interconnected lock?
Interconnected Locks: a lockset whose trim provides a means of simultaneous retraction of two or more bolts which may also be operated independently Medium duty Commercial, government or multi-...
What is the center to center for the Falcon H lock?
The dimension between the center of the deadbolt bore and the knobset bore is 4".  See template FH100 attached here for more dimensions.
What size is the Schlage H escutcheon?
  Schlage H-Series Escutcheons    Part Number  Description Dimension   07-057  Inside escutcheon and turn  6.92" x 2.75"  07-035  Inside escutcheon, dummy - H170  6.92" x 2...
Are the Schlage H series knobs sold separate?
The knobs are available, part numbers listed below. 01-008 for a closed knob 01-009 for open levers 01-018 for cylinder knobs, LEV lever design not available in 01-018 01-026 for FSIC Specif...
Did the H-Series deadbolt and linkage change?
As of May 23, 2011 the Schlage H-Series is assembled with the Schlage B500-Series deadbolt and a new linkage. If the deadbolt is being replaced for a lock manufactured prior to May 23rd, 2011...
What is the grading for S200 and H series locks?
Neither lock has a BHMA grade.
What does the H-Series housing and linkage look like?
The housing and linkage is what sits underneath the inside escutcheon plate and can be seen in this exploded view.  The linkage is what gives the H lock simultaneous retraction.  It allows the dead...