H series lock brocures

RELATED FAQS

Question
Answer
The dimension between the center of the deadbolt bore and the knobset bore is 4".  See template FH100 attached here for more dimensions.
Neither lock has a BHMA grade.
As of May 23, 2011 the Schlage H-Series is assembled with the Schlage B500-Series deadbolt and a new linkage. If the deadbolt is being replaced for a lock manufactured prior to May 23rd, 2011...
The knobs are available, part numbers listed below. 01-008 for a closed knob 01-009 for open levers 01-018 for cylinder knobs, LEV lever design not available in 01-018 01-026 for FSIC Specif...
The housing and linkage is what sits underneath the inside escutcheon plate and can be seen in this exploded view.  The linkage is what gives the H lock simultaneous retraction.  It allows the dead...