Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
H SERIES INNERCONNECT
”
RELATED FAQS
Question
Answer
Are H-Series doors available with seamless edges?
Resolution:
For hurricane applications, seamless edges are available as an option:H-Series doors are available with optional seamed filled (HF) seam welded (HW) door edges.HE-Series doors are availab...:
Are flush bolts available on the inactive leaf of hurricane double doors with either FBC or NOA approvals?
Resolution:
Ives SB360 surface bolt at top and bottom are the only flush bolts approved for use on H-Series hurricane FBC or NOA applications? The only approved latching hardware for inactive leaf of pairs w...:
Did the H-Series deadbolt and linkage change?
Resolution:
As of May 23, 2011 the Schlage H-Series is assembled with the Schlage B500-Series deadbolt and a new linkage. If the deadbolt is being replaced for a lock manufactured prior to May 23rd, 2011...:
What does the E & T or H stand for in the falcon conventional cylinder section of the Falcon Price book?
Resolution:
E, T, or H represents knob designs for the Falcon "X" series cylindrical lock. E = Elite T = Troy H = Hana :
How do you remove the cylinder from an A series knob?
Resolution:
*The older wafer style locks did not use a knob catch. The chassis must be disassembled before the knob can be removed because it uses the wafer lock chassis spindle.:
What is an interconnected lock?
Resolution:
Interconnected Locks: a lockset whose trim provides a means of simultaneous retraction of two or more bolts which may also be operated independently Medium duty Commercial, government or multi-...:
What is the difference between the L-Series and H-Series doors?
Resolution:
The L-Series doors are designed for virtually all construction requirements in commercial building applications. They have also been tested and approved for uniform wind load per ASTM E330. ...: