Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ guard x trims ”

Resolution: Replacing the battery on the 2670 should not cause the unit stop working. Make sure the spring that provides tension on the plastic finger is not bent out. The spring should be at a 90 degrees...:

Can the 2670 be cut down to fit smaller door widths?

Resolution: The 2670 Guard X device can't be cut down to fit doors less than 3 feet. This device is designed to fit doors 36"- 48" in door width.:

Is the 2670 Guard X fire rated?

Resolution: The Von Duprin 2670 Guard X is used only on non fire rated doors thus is not fire rated.:

Does Von Duprin offer any pulls that through bolt to the Guard-X device?

Resolution: Von Duprin does not offer any lever trim or pulls that through bolt to the Guard X device. Ives has the 8102-6 and 8105-6 pulls that can be lined up with the mounting screws of the exit device b...:

Is there an electric strike that will work with the 2670 Guard X?

Resolution: The Von Duprin 2670 Guard X does not have a spring loaded latch bolt, it is a dead bolt and will not operate with any electric strikes.:

What exit device is weather rated?

Resolution: Exit devices are not designed for exterior application. If used in an exterior applications then a powder coated finish on the 33/35 and 98/99 series are recommended for exterior applications. ...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ guard x trims ”

RELATED FAQS