Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ guard x catalog ”

RELATED FAQS

Question
Answer
Is the 2670 Guard X fire rated?
The Von Duprin 2670 Guard X is used only on non fire rated doors thus is not fire rated.
Where is the catalog information and specifications on the Ives edge guards?
Information for Ives edge guards can be found on pages B51-B53 of the Ives Catalog linked here, and in the edge guard ordering guide linked here.
What strike is required when using the 2670 Guard-X on a pair of doors?
With a mullion: Use the standard strike 267 With no mullion and inactive leaf being held closed with flush or surface bolts: Use the 2609 double door strike
What cylinder is used on the 2670?
The 2670 Guard X uses a standard rim cylinder for either push side or pull side.  The rim cylinder can be installed to the outside of the opening with an offset pull to operate the 2670 Guard X d...
What exit device is weather rated?
Exit devices are not designed for exterior application. If used in an exterior applications then a powder coated finish on the 33/35 and 98/99 series are recommended for exterior applications. ...
Can the 2670 be cut down to fit smaller door widths?
The 2670 Guard X device can't be cut down to fit doors less than 3 feet.  This device is designed to fit doors 36"-48" door width.
What is the part number for the pcb board on the 2670 Guard X exit device?
The following are part numbers for 2670 Guard X exit device PCB: pcb.10018 for English pcb.10019 for Spanish pcb.10020 for French