Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ glynn johnson ohs ”

RELATED FAQS

Resolution: All the templates can be found at us.allegion.com Please click here :

What Glynn Johnson overhead stop do I need if I want heavy duty surface mounted?

Resolution: Either the 70, 79HD, 81 or 90 series.:

Can a 4110 EDA and a Glynn Johnson 100 be used together?

Resolution: A special template is not needed, the closer drops down far enough on the door where it does not conflict with the GJ100 series concealed overhead stop. :

Will a GJ 90 overhead stop work with an LCN 4642?

Resolution: Use the flush ceiling mount to make the 4642 compatible with the GJ 80, 90, 100, 410, or 450 Glynn Johnson overhead stop.:

What special template (ST) is used with a 2030 closer and GJ over head stop?

Resolution: Special template ST-2211 is used to mount a 2030 series closer with a GJ 70,79,81,90, and 450 series overhead stops. This ST works with any GJ "surface" mounted stop. The 2030 closer cannot b...:

Can I mount an LCN Cush closer with an GJ overhead stop?

Resolution: It would be unnecessary to use the CNS/Cush arm and the Glynn Johnson overhead devices in the same application, both mechanisms stop the door.:

What is the Ives invisible latch replacement for the Glynn Johnson AA, BB and AP2 latches?

Resolution: The Ives version is the same as old Glynn-Johnson versions.:

How is the 100 series from Glynn Johnson different from the 100 ADJ series?

Resolution: The basic units are similar. The ADJ has a 12" long track that is mounted in the frame to allow the degree of opening to be selected in the field anywhere from 85 to 110 degrees, where the standar...:

Can I use a Glynn Johnson 410 with a 4040 regular (pull side) mount?

Resolution: ST-1630 is required when mounting a 4041 or 4040XP door closer regular (pull/hinge) side with a concealed GJ100 or GJ410 series over head stop.This ST also REQUIRES the use of a 4040-18TJ drop plat...: