Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ full size interchangeable less logo ”

RELATED FAQS

Resolution: DESCRIPTION PART NUMBER Conventional Core 23-030 Conventional Core less logo 23-031 Primus Core 20-740 Primus XP Core 20-740-XP Primus Core less logo 20-741 ...:

How to order a T series lock with a Corbin Russwin full size interchangeable prep.

Resolution: Specify the J cylinder suffix followed by IC-CR6 or IC-CR7 (6 or 7 pin Corbin core) Example: T581J IC-CR6 This will accommodate an 8000 or 8000-7 Corbin Russwin Full Size core.:

Can the AL locks be ordered to accept Corbin Russwin core?

Resolution: The AL lock can not be ordered to accept any competitor full size core. The ND lock should be used in these applications.:

How to order the mortise full size interchangeable core with a construction core.

Resolution: This only applies to the full size interchangeable cores. The SFIC mortise cylinders have part numbers for housings with construction cores (Disposable and Keyed). Simply add (-ICX) to the end o...:

Does Schlage offer a 7 pin FSIC?

Resolution: The Schlage Full Size IC core is 6 pin only. :

What cylinders are available with UL437?

Resolution: UL437 is testing requirement that cylinders pass both a timed cylinder pick test, a forceful core/cylinder pull test as well as a destructive entry test. We have various c...:

What is the part number for T lock tailpiece used with a conventional cylinder?

Resolution: Refer to Table 1 for a list of T lock tailpieces for conventional cylinders. Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces:

Why can't I remove the control key from the core after the core is inserted into the lever?

Resolution: The lever may be missing the slot feature for the core locking lug. Verify slot is in place.:

What is the part number for a full size interchangeable core control key?

Resolution: Classic Conventional Key Blanks and Cut Keys Part Number Description Key Blanks 35-056 Control Standard bow, embossed both sides 35-076 Standard bow, unembossed both s...: