Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ full size core service manual ”

RELATED FAQS

Resolution: DESCRIPTION PART NUMBER Conventional Core 23-030 Conventional Core less logo 23-031 Primus Core 20-740 Primus XP Core 20-740-XP Primus Core less logo 20-741 ...:

What is the part number for T lock tailpiece used with a conventional cylinder?

Resolution: The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. Refer to Table 1 for a list of T lock tailpieces for conventional cylinders. Table 2 show...:

What is the part number for a control pin for a 23-030?

Resolution: There are two parts that can be referred to as control pins for a 23-030 (FSIC core).C603-967 is the lower control pin that sits in the seventh hole of the FSIC plug. (part B in exploded view) ...:

How to order the mortise full size interchangeable core with a construction core.

Resolution: This only applies to the full size interchangeable cores. The SFIC mortise cylinders have part numbers for housings with construction cores (Disposable and Keyed). Simply add (-ICX) to the end o...:

What cylinders are available with UL437?

Resolution: UL437 is testing requirement that cylinders pass both a timed cylinder pick test, a forceful core/cylinder pull test as well as a destructive entry test. We have various c...:

Can I get the RU series with a Schlage Full Size Interchangeable core?

Resolution: The RU lock can accept a Schlage Full Size core, but the cylinder suffix must be specified as "J IC-SC" so the correct parts are supplied. The tailpiece will come with the lock. Example: RU581J IC-SC:

Does Schlage offer a 7 pin FSIC?

Resolution: The Schlage Full Size IC core is 6 pin only. :

Is the 23-030 a small format or full size core?

Resolution: The 23-030 is a Schlage Full size interchangeable core. :

What is the part number for a full size interchangeable core control key?

Resolution: Classic Conventional Key Blanks and Cut Keys Part Number Description Key Blanks 35-056 Control Standard bow, embossed both sides 35-076 Standard bow, unembossed both s...:

What is the part number for the full size core driver for the ND series?

Resolution: The ND-Series FSIC driver is part number N523-127.:

Is the C987 a small format or full size core?

Resolution: The "C" indicates small format IC core, which is the only core style Falcon products. The C987 will be provided less core unless -6, or -7 suffix is specified (6 or 7 pin core) Example:...: