Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
FSIC mortise cylinder driver
”
RELATED FAQS
Question
Answer
Driver pins on SFIC mortise housings loosen up and fall out.
Resolution:
Issue: Schlage SFIC mortise cylinders have potential for the driver pins to fall out affecting the ability to lock and unlock the device.Facts: Housings manufactured between 06/01/2...:
What is the part number for the SFIC rim cylinder driver?
Resolution:
The Schlage SFIC rim cylinder driver is part number B520-365, shown below. Figure 1: SFIC Rim Cylinder Housing:
What type of cylinder is the 30-001?
Resolution:
The 30-001 is a conventional mortise cylinder with a clover cam, compression ring and spring for use on rose trim. For use with the L9000 mortise locks except for the L9060 outside cylinder.: