Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
FSIC and sfic
”
RELATED FAQS
Question
Answer
Is the CS210 available with SFIC or FSIC?
Resolution:
Schlage is pleased to announce in January 2012 the addition of small format interchangeable core (SFIC) and full size interchangeable core (FSIC) to our CS210 interconnected lock series. Clic...:
Does the B600 series fit on a 1-3/8" thin door?
Resolution:
The outside housing, B600-089, can be ordered to retrofit an existing standard cylinder B600. For B662 (double cylinder) 2 of the B600-089 rings are required. Description: 1 1/8” ...:
Is there a thick door kit for the B500 deadbolt?
Resolution:
B500 with standard cylinders How to order with the deadbolt:Door thickness over 1 3/4" to 2 1/4", specify door thickness when deadbolt is orderedDoor thickness greater than 2 1/4" will require...:
How long is the ND tailpiece for a thick door?
Resolution:
Schlage ND-Series tailpieces for extended doors are available by only two means, but are not available to order separately. If an extended tailpiece is needed, then a complete lock ...:
What parts are needed to convert JD to BD on an ND lock?
Resolution:
For ND Locks shipping prior to January 30, 2017:The springcage(s), lever, and core driver will need to be changed. Depending on the function the components below are required.Outside spring c...:
How can you tell the difference between the FSIC and SFIC cores?
Resolution:
There are several ways to spot differences, see Figure 1, but the easiest is to look at the face of each core. The face of both cores looks like a "figure 8". With small format, bo...:
Does Schlage offer restricted SFIC keyways?
Resolution:
Schlage Everest B keyways are restricted SFIC keyways.:
Is the CS200, S200, or S locks available in SFIC?
Resolution:
The CS200, S200, and S-Series is not available with the small format interchangeable core option.:
Will the SFIC mortise housing accept both six and seven pin cores?
Resolution:
Yes. Both Schlage and Falcon SFIC mortise housings will accept 6 and 7 pin cores with no additional parts.:
Are the H locks available in SFIC?
Resolution:
The H-Series is not available with a small format interchangeable core option.: