Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ flushbolt prep for frame ”

RELATED FAQS

Resolution: All the templates can be found at us.allegion.com Please click here :

What is the replacement for the Locknetics 9100 series electric strike?

Resolution: The Locknetics 9100 series electric strikes are replaced with Von Duprin 6211 and 6210 electric strikes. The 6211 is used if the frame is being replaced. The 6210 is for ...:

How can the Von Duprin 4854 mullion be ordered when using the 6300 electric strike?

Resolution: :

Where is factory recommendation for location of an EPT?

Resolution: EPT installation guidelines are as follows: Recommended location is 6" below top hinge per template Steelcraft will locate the power transfer prep at the Von Duprin re...:

Can a filler or cover plate be used to blank out a EPT prep on a fire rated frame?

Resolution: Yes, a filler plate can be used to cover an EPT prep as long as it is made from the same material as the frame. This information can also be found in NFPA 80 under Chapter 5 for Field Modifications.:

What mullions should be used with XP devices?

Resolution: The Von Duprin XP98/99 device uses a different strike than standard 98/99 device. The 909 strike is for non fire rated XP devices and the 954 strike is for the fire rated XP device. 49/9954 mul...: