Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ flair return spring ”

Resolution: Issue: One or both levers don't stay horizontal and droop down. Facts: Falcon T series locks in a high use application. Cause: Weak or broken springs within t...:

What is the part number for the lever return spring for the old M series mortise lock?

Resolution: Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series. Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...:

What is the part number for the lever return spring for an old 182LE trim?

Resolution: These parts are no longer available. For reference the spring part number is 4841 and the clip part number is 4326.:

What is the part number for the lever return spring for the MA lock?

Resolution: Lever assemblies part numbers are found in the Pricebook. Note they are handed.:

What is the dimension of the S200 Flair escutcheon?

Resolution: Dimensions vary depending on the escutcheon. Flair inside trim, width 3.25" height 9.0" OVAL SHAPED Meteor outside trim, width 3.00" height 8.0" Saturn inside trim, width 3.00" height 8.0":

Is the Flair lever design handed?

Resolution: The Flair design handing must be specified when ordering a complete lock or just the lever.:

Is the deadlocking spring replaceable on a 19-R device?

Resolution: The spring itself is not replaceable, you would need to replace the 19 centercase assembly.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ flair return spring ”

RELATED FAQS