Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FIRE RATING GASKET ”

Resolution: Intumescent seals or gaskets are not required on fire rated steel doors. Generally speaking, the requirement for intumescent seals or gaskets are a function of the individual manufacturers’ listi...:

What is ASTM E-119?

Resolution: ASTM E-119 is a test standard for walls, partitions and floor or roof systems: This test standard is also used for ceramic type glasses when used as window wall and/or borrowed light frames.As...:

What is the max rating available on an full glass (FG) door?

Resolution: A UL 20 minute fire rating is the maximum fire rating for a Full Glass (FG) door design. A14-Series door construction: Max fire rating is 20 minute. UL label only FG must use Over-Lapping Stee...:

Is the Von Duprin Guard-X exit device fire rated?

Resolution: The Von Duprin Guard-X exit device is not fire rated because the deadbolt is not spring loaded. Therefore, there would be no positive latching as required on a fire rated opening. :

How many P & D (Pierce and Dimple) holes are in a frame?

Resolution: The following are quantities of EMA anchors (pierce and dimples) based on range of frame height: Quantity Nominal Frame Height 2 1'...:

Are Steelcraft doors and/or frames fire rated?

Resolution: Yes, Steelcraft doors and/or frames are available and can carry a UL, WH or FM label. The type of fire label (UL, WH or FM) is dictated by the specifications and local building code. Doors ...:

What is the maximum glass light size available on a 20 minute sidelight frame?

Resolution: On fire rated transom and/or sidelight frames and fire rated window frames, Steelcraft labeling procedures only control the O/A width and/or height of the frames based on wall condition. The amount...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FIRE RATING GASKET ”

RELATED FAQS