fire rated head panic parts

RELATED FAQS

Question
Answer
A standard exit device can't be modified to a fire rated exit device.  In order to get a product with the UL fire label, a new device must be purchased. This is a UL requirement.
The top latch for a Fire rated surface vertical rod device is part #650375-00 which replaced the old part #F588.
Elevation frames are available in: F-Series (F16 or F14) FN-Series (FN16 or FN14) MU-Series (MU16, MU14) Additional parameters of the frame components: Perimeter (Head and Jambs) Frame: ...
Panic Hardware and Fire Exit Hardware are two different types of exit devices, and the proper selection is determined by code requirements. Panic Hardware is an exit device which is tested for u...
The most obvious difference (in the device) is the lack of mechanical dogging on a Fire Rated Device.  There are some internal parts that may be different and the method it is secured to the d...
Falcon (19. 24, 25, and XX) parts manuals for Exits are downloadable on the 
The use of Panic Hardware and/or Fire Exit Hardware is required by the International Building Code (IBC) and NFPA 101 – The Life Safety Code, depending on which code and which edition of the code i...
The new 33A/35A center case will not work with the old 33/35 series exit devices.   It is never intended to use parts to convert a device from one Series to another Series as this w...