Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FIRE DOOR CLOSERS STANDARDS ”

RELATED FAQS

Question
Answer
Are the Falcon SC Series door closers fire rated?
615R is not a door closer model number. It is a UL number for the Falcon SC Series closers.
Yes, the Falcon SC Series closers have a UL listing.
What are Hold Open Closers & Magnets?
Hold Open Closers & Magnets (Fire/Life safety products) provide a wide range of solutions.  Single or multi-point hold open closers Utilize an electromechanical closer. Hold the door o...
Is the 3130 Series closer Fire Rated?
The 3130 Series closer is UL listed- Fire Rated (UL-10C) for up to 3 Hr.   The Door and Frame Manufacturer needs to be contacted to verify their Door/Frame rating would not be ...
Can you replace a regular arm with a hold open with out moving the door closer?
Yes, as long as you stay with the like style arm.  Example: replace an RW/PA with HW/PA, replace an EDA with HEDA, or replace a CUSH with HCUSH.
What are Overhead Concealed door closer?
Overhead Concealed door closers are used to provide a more aesthetic look to the opening.  Concealed in either the frame or the door Offer the ability to be adjusted to maintain...
What is ASTM E-119?
ASTM E-119 is a test standard for walls, partitions and floor or roof systems: This test standard is also used for ceramic type glasses when used as window wall and/or borrowed light frames. ...
What would cause an ME Series closer (2310ME/4310ME/4410ME) to pop back into hold open as it is closing?
This condition can be caused by the "closing speed adjustment" being regulated for a fast closing speed. Try adjusting the closing speed to slow down the closing of the door. If that does not corre...
What special template (ST) is used with the 2030 closer and a low profile track and roller?
The 2030 closer requires a minimum 1-3/8" top rail on the door for the standard track.  For a top rail less than 1-3/8" and as narrow as 1", you could use the l...