Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Falcon Z lock ”

RELATED FAQS

Resolution: Grade 2 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards: Cylindrical, Bored and Preassembled Locks & Latches 400,000 Certified Cycles ANSI...:

What is the RU lock?

Resolution: The RU series from Falcon is a pre-assembled unit lock designed to retrofit existing unit locks manufactured by Falcon, Corbin Russwin and Yale. It exceeds ANSI Grade 1 specifications and is ...:

What is a Grade 1 Lock?

Resolution: Grade 1 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards: Cylindrical, Bored and Preassembled Locks & Latches 8...:

Are parts still available for the old Falcon M locks?

Resolution: Related solution: What is the part number for the lever return spring for the old M series mortise lock?:

What replaced the Falcon Z?

Resolution: The Falcon W replaced the Z lock in July 2006. The Z lock was a cylindrical chassis.:

How do I identify the old Falcon T lock chassis versus the new T lock chassis?

Resolution: The date of manufacture printed on the chassis cover (see below), will determine if you have a revised or old chassis. Chassis manufactured mid-June 2013 will have the new improvements. The first...:

Will a Schlage L9000 thumbturn work on a Falcon MA lock?

Resolution: The Schlage 09-509 Rose style thumbturns will work but the spindle sits 90 degrees off from each other (Schlage is square, Falcon is diamond). The result is the throw will end up 10 and 2 o'c...:

How do I cut a door to accept a Falcon W series lock?

Resolution: For W lock levers, you can choose whether or not to install the mounting posts. This will also affect how the door is prepped so be sure to determine how you will install the locks befor...:

Is the new Falcon T Series latch compatible with all available T lock strikes?

Resolution: The new Falcon T-Series latch, introduced mid-June 2013, will work with all available T lock strike options. No changes have been made to the strikes.: