Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
falcon trim working in reverse
”
RELATED FAQS
Question
Answer
Will the 25-R or 25-V work with Simplex trim?
Resolution:
The 25-R or 25-V device does meet the trim input requirements set by KABA for their trim so the two should be compatible. However, the KABA trim has never been tested in house for the Fa...:
Will the Schlage CO or AD trim work with the Falcon 25V device?
Resolution:
The Schlage AD/CO trims are not compatible with the Falcon 25-V device due to the main cam on the device rotating the opposite direction for a given hand compared to the AD/CO trims output dri...:
What punches are available to cut keys?
Resolution:
See tables below for available punches. KEY SECTION BLUE PUNCH Everest S*, C*, & Classic/Obverse* 40-075 Everest T* & ...:
Is the Von Duprin E996L electric trim handing field reversible?
Resolution:
The Von Duprin E996L electric trim is field reversible. See attached 996L installation instructions on page 2 for rehanding procedure. 996L Installation Instructions:
Can 912L be re-handed in the field?
Resolution:
The 912L trims produced after 2/28/2011can be re-handed in the field. See appropriate 912L instructions at 912L instructions for trims after 2/28/2011For 912L instructions on trims prior ...: