Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ falcon touch pad part ”

RELATED FAQS

Resolution: A purchase order must by entered through Order Entry. Part number 50-123 for Schlage and 50-123F for Falcon. Reference the structure number (preferred) or an order num...:

Repalcement parts for Schlage Electronics 672 TouchBar and 692 SmartBar

Resolution: See attached table: Schlage 692/672 Parts Cross ref:

What is the part number for the former F588 from Monarch?

Resolution: The top latch for a Fire rated surface vertical rod device is part #650375-00 which replaced the old part #F588.:

What is the part number for T lock tailpiece used with a conventional cylinder?

Resolution: Refer to Table 1 for a list of T lock tailpieces for conventional cylinders. Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces:

What is the part number for the dogging assembly for a 1690/1790/2390?

Resolution: For any device made after 2001, the part number for the Falcon 1690 dogging kit would be KIT.1197 For devices made prior 2001, the dogging kit is no longer available and a new device must be ...:

Will Falcon B locks prepped for BD accept a 6 or 7 pin core?

Resolution: The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core). The tailpiece shown below is used for bo...: