Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ falcon MA return spring ”

Resolution: These parts are no longer available. For reference the spring part number is 4841 and the clip part number is 4326.:

MA launch information

Resolution: The MA was launched 4/1/10 and replaced the Falcon M lock. :

What are the dimensions of the MA Series escutcheon?

Resolution: The Falcon MA Series escutcheon is roughly 8.15" tall x 2.28" wide x 0.37" thick.:

Will a Schlage L9000 thumbturn work on a Falcon MA lock?

Resolution: The Schlage 09-509 Rose style thumbturns will work but the spindle sits 90 degrees off from each other (Schlage is square, Falcon is diamond). The result is the throw will end up 10 and 2 o'c...:

What is the part number for the lever return spring for the MA lock?

Resolution: Lever assemblies part numbers are found in the Pricebook. Note they are handed.:

What is the part number for the lever return spring for the old M series mortise lock?

Resolution: Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series. Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...:

Why does the lever on my T lock lever droop?

Resolution: Issue: One or both levers don't stay horizontal and droop down. Facts: Falcon T series locks in a high use application. Cause: Weak or broken springs within t...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ falcon MA return spring ”

RELATED FAQS