Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Falcon MA rehanding ”

RELATED FAQS

Resolution: No parts are compatible between the Falcon MA-Series and the obsolete Falcon M-Series.:

What template to use for the Falcon MA mortise lock?

Resolution: The following templates are for the MA lock. Use the matrix in each template for the specific function. See here for Sectional trim . See here for Escutcheon trim. :

Is the MA lock handing field reversible?

Resolution: The MA lock is field reversible. The process involves three potential steps depending on what hand is needed. Rotating latchbolt - Changes swing of lock. ex (RH to RHR) or insw...:

MA launch information

Resolution: The MA was launched 4/1/10 and replaced the Falcon M lock. :

What are the dimensions of the MA Series escutcheon?

Resolution: The Falcon MA Series escutcheon is roughly 8.15" tall x 2.28" wide x 0.37" thick.:

Does Falcon have a breakaway lever trim feature on mortise locks?

Resolution: The MA lock does not have Vandlgard or a breakaway trim feature, however, the lever spindle on the MA lock will shear if too much force is applied in order to prevent internal lock damage and resis...:

Will a Schlage L9000 thumbturn work on a Falcon MA lock?

Resolution: The Schlage 09-509 Rose style thumbturns will work but the spindle sits 90 degrees off from each other (Schlage is square, Falcon is diamond). The result is the throw will end up 10 and 2 o'c...: