Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ falcon ma indicator ”

RELATED FAQS

Resolution: The Falcon D400 and D800 series (including the D871) were discontinued in 2008.:

Does Schlage or Falcon have an indicator deadbolt?

Resolution: Both the Schlage B571 and Falcon D271 are occupancy indicator deadbolts that read "IN USE" and "VACANT". The B571 is shown below but the indicator will be identical to the D271 (see Figu...:

Is 630 Stainless Steel finish available on the latitude lever for Falcon MA series mortise locks?

Resolution: The following lever designs are not available in 630 finish with Falcon MA series: Latitude, Longitude, Broadway, and Boardwalk :

MA launch information

Resolution: The MA was launched 4/1/10 and replaced the Falcon M lock. :

Will a Schlage L9000 thumbturn work on a Falcon MA lock?

Resolution: The Schlage 09-509 Rose style thumbturns will work but the spindle sits 90 degrees off from each other (Schlage is square, Falcon is diamond). The result is the throw will end up 10 and 2 o'c...:

Does Falcon have a breakaway lever trim feature on mortise locks?

Resolution: The MA lock does not have Vandlgard or a breakaway trim feature, however, the lever spindle on the MA lock will shear if too much force is applied in order to prevent internal lock damage and resis...:

What are the dimensions of the MA Series escutcheon?

Resolution: The Falcon MA Series escutcheon is roughly 8.15" tall x 2.28" wide x 0.37" thick.:

Are the M and MA locks compatible?

Resolution: No parts are compatible between the Falcon MA-Series and the obsolete Falcon M-Series.: