falcon m series parts

RELATED FAQS

Question
Answer
Refer to Table 1 for a list of T lock tailpieces for conventional cylinders.  Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces
The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core).  The tailpiece shown below is used for bo...
The top latch for a Fire rated surface vertical rod device is part #650375-00 which replaced the old part #F588.
The Falcon 8200 Series control box can be ordered as either an 8230-3462 or an 8240-3462. They are the same part.
Only the lever return spring is available.
Related solution: What is the part number for the lever return spring for the old M series mortise lock?
PCB only for the Alarm Kits prior to June 11th, 2012 is part #650335 and was used in the older 17 & 18 devices, 19, & pre June 2012 24/25's.
This circuit board will NOT work on the updated 24/25 Alarm Kits that released June 11th, 2012.
 Falcon T Lock Latch Conversion Table       Effective mid-June 2013  Old Part Number   New Part Number       ...
   Falcon T Lock Latches No Longer Offered With The T Lock     Effective mid June 2013  Old Part Number  New Part Number   &nb...