Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
falcon lock blanks
”
RELATED FAQS
Question
Answer
What is the square block that holds the L lock levers onto the door?
Resolution:
The square block is probably the springcage assembly, L283-040. This component has an internal spring to keep the lever in the horizontal position.:
What are the keyway types and patents?
Resolution:
HIGH SECURITY Primus/Primus XP: In addition to six cuts for standard locking mechanism, there are five side finger pins to operate the secondary sidebar lock. Primus keys will operate non-Pri...:
Can a filler or cover plate be used to blank out a EPT prep on a fire rated frame?
Resolution:
Yes, a filler plate can be used to cover an EPT prep as long as it is made from the same material as the frame. This information can also be found in NFPA 80 under Chapter 5 for Field Modifications.:
What is the part number for the lever return spring for the old M series mortise lock?
Resolution:
Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series. Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...:
Are parts still available for the old Falcon M locks?
Resolution:
Related solution: What is the part number for the lever return spring for the old M series mortise lock?:
What replaced the Falcon F lock?
Resolution:
The Falcon W-series lock has replaced the Falcon F-series and the Falcon Y-series. :
How do I cut a door to accept a Falcon W series lock?
Resolution:
For W lock levers, you can choose whether or not to install the mounting posts. This will also affect how the door is prepped so be sure to determine how you will install the locks befor...:
Will a Schlage L9000 thumbturn work on a Falcon MA lock?
Resolution:
The Schlage 09-509 Rose style thumbturns will work but the spindle sits 90 degrees off from each other (Schlage is square, Falcon is diamond). The result is the throw will end up 10 and 2 o'c...:
Is the new Falcon T Series latch compatible with all available T lock strikes?
Resolution:
The new Falcon T-Series latch, introduced mid-June 2013, will work with all available T lock strike options. No changes have been made to the strikes.:
How do I identify the old Falcon T lock chassis versus the new T lock chassis?
Resolution:
The date of manufacture printed on the chassis cover (see below), will determine if you have a revised or old chassis. Chassis manufactured mid-June 2013 will have the new improvements. The first...: