Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
FALCON KEY IN LEVER FOR SCHLAGE NDEB
”
RELATED FAQS
Question
Answer
Why is the key locking and/or unlocking my E996L for a 9875?
Resolution:
The 7500 mortise lock should be configured for NL function as shipped not as Classroom. See figure 4-3 in E996L instructions.:
How do I change the function of the Von Duprin 7500 mortise lock from Lever ( classroom ) to NL ( night latch )?
Resolution:
To convert the Von Duprin 9975L to 9975NL exit function follow these steps (Note: the mortise lock is shipped as Night Latch from the factory): Turn the NL screw on 7500 mortise lock counter clo...:
How are interchangeable cores installed?
Resolution:
A control key is required to install or remove an interchangeable core from a housing or lever. The control key is identified by having "CONTROL" stamped on the bow. How to install and remove an i...:
Why would the 996L trim not lock or unlock when installed with 98 or 99EO?
Resolution:
The 98/99 rim and vertical rod exit devices are shipped with NL drive screw to function as a Night Latch. To convert the device to Class Room, remove the NL Drive Screw on 98/99 center case ass...:
What is the part number for a Schlage FSIC lever on an ND lock?
Resolution:
On ND Series locks manufactuered prior to January 30, 2017:The ND FSIC lever part number was 03-032. :
What is included in the Schlage Mobile Access Solutions?
Resolution:
Schlage Control™ mobile enabled smart locks Schlage NDEB and LEB mobile enabled wireless locks Schlage MTB mobile enabled multi-technology wall mount readers Schl...:
Will a Medeco key-in-lever cylinder fit into an ND lock?
Resolution:
Medeco does offer a key-in-lever cylinder to fit the Schlage ND. You will need to contact Medeco for the cylinder Specify a key-in-lever cylinder to fit the Schlage ND lo...:
Can I put a Schlage Key-In-Lever cylinder into a Falcon D100 or D200 lock?
Resolution:
For a Schlage "C" keyway: Specify "CP6" as the cylinder suffix when ordering D100 or D200 locks (All other Schlage keyways are not available).:
Schlage NDEB - Special Functions Now Available
Resolution:
The NDEB now supports these functions, new to the NDE series, via the Interior Push Button Storeroom Lockset is normally secure with outside lever disengaged. ...:
Do Schlage cylinders meet BHMA A156.30 Grade 1?
Resolution:
Schlage does not have any cylinders certified to the BHMA A156.30 Grade 1 standard. :
Is a standard cylinder keyway such as "C" available in SFIC?
Resolution:
It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system. A keyway name may be shared between the two key fami...:
Does Falcon have a breakaway lever trim feature on mortise locks?
Resolution:
The MA lock does not have Vandlgard or a breakaway trim feature, however, the lever spindle on the MA lock will shear if too much force is applied in order to prevent internal lock damage and resis...:
What cylinders are used to operate Von Duprin devices?
Resolution:
If unclear whether mortise, rim, or key-in-lever is needed, reference links below to determine what cylinder type is needed. In order to determine cylinder type n...:
What is the length of a cylindrical tailpiece?
Resolution:
Key-in-lever tailpieces differ in length depending on the lock series, function, and design. Click here to identify the tailpiece and length. NOTE: Modular ...:
Does Schlage make a mortise lock that the lever on either side retracts the latch and a key on either side retracts the deadbolt?
Resolution:
The L9466 Store/Utility Room lock can provide this functionality. Operation: Latchbolt retracted by knob/lever either side. Deadbolt thrown or retracted by key from either side. When the deadbolt ...:
Where can I find the new NDEB lock installation guide?
Resolution:
Please click here to get the NDEB installation guide.:
Where can I find the new NDEB lock template?
Resolution:
For the NDEB Template, click here For the NDEB Door Manufacturing Template, click here. :
Does the PD listed with lock model number mean anything?
Resolution:
Schlage and Falcon use the P cylinder suffix to designate conventional key-in-lever (KIL) 6 pin cylinder. The D means that the lock will have a deadlatch.:
Key in lever
Resolution:
A lock where the outside trim has the key cylinder incorporated into the lever itself.:
What is the part number for an ND lever?
Resolution:
ND-series locks manufactured prior to January 30, 2017:03-030 - Closed03-031 - Privacy, Cylinder- Schlage KIL (P,L) & Push or Push & Turn Button03-032 - Schlage FSIC 03- 000 - Schlage ...: