Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FALCON EXIT DEVICE NL ”

RELATED FAQS

Resolution: The Von Duprin 98/99EO exit devices will accept any of the exterior trims that we offer for 98/99 exit devices without any extra parts. 996L, 996L-NL, 996L-DT, 996L-BE, 990NL, 990DT, and 110NL a...:

How does the Von Duprin 98/99 rim or vertical rod exit device with lever trim convert from L to L-NL function?

Resolution: To convert the Von Duprin 98/99 Rim or Vertical (Rod or Cable) Exit Device with functional lever (996L-R/V) to act like a rigid lever (996L-NL-R/V) with key over ride follow these steps: R...:

Does Von Duprin supply the 9875, 9975, 9875-F and 9975-F mortise exit devices with NL-OP trim function?

Resolution: For night latch function with pull by others, the 98/99 series mortise exit device should be ordered as NL less trim, e.g., 9875NL-L/TRIM. We will furnish a device only, and the mortise cyl...:

Does Von Duprin offer an NL or NL-OP function with the 8827 exit device?

Resolution: This option is not available as there is no NL cam to directly drive the rods and using a key to lift the heavy stainless, brass or bronze rods would damage the key. :

How is HB achieved on the 1690 device?

Resolution: Install the pinion cam at the top of the retractor per Figure 7-3 in Step 7 of 1690 Instructions.:

How to order a 25-C device with the NL-OP trim function?

Resolution: Device would be ordered as a 25C-C as of June 2012.The C-C suffix designates the 25C will come with the 718C-C cylinder control which uses a 1-¼" mortise with a narrow straight cam: