Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Falcon elevator lock ”

RELATED FAQS

Resolution: The RU series from Falcon is a pre-assembled unit lock designed to retrofit existing unit locks manufactured by Falcon, Corbin Russwin and Yale. It exceeds ANSI Grade 1 specifications and is ...:

What is an interconnected lock?

Resolution: Interconnected Locks: a lockset whose trim provides a means of simultaneous retraction of two or more bolts which may also be operated independently Medium duty Commercial, government or multi-...:

Did Falcon ever make a lock for elevator doors?

Resolution: Falcon manufactured an EZF101 which was a large plate with a recessed lever for use in elevators. This item is no longer available. :

How can the Von Duprin 98/9975-L with 996L classroom trim function be converted as a night latch function in field?

Resolution: The following steps are required to convert the Von Duprin 98/9975L from classroom to night latch function: Order new 996L-NL-M trim and reset NL drive screw in mortise lockbody as se...:

Common wiring diagrams

Resolution: Electronic Protocols: Access Control Door with electric trim Access Control with electric strike Access control with electric strike and LCN 460...:

Is the new Falcon T Series latch compatible with all available T lock strikes?

Resolution: The new Falcon T-Series latch, introduced mid-June 2013, will work with all available T lock strike options. No changes have been made to the strikes.:

How do I identify the old Falcon T lock chassis versus the new T lock chassis?

Resolution: The date of manufacture printed on the chassis cover (see below), will determine if you have a revised or old chassis. Chassis manufactured mid-June 2013 will have the new improvements. The first...:

What is a Grade 1 Lock?

Resolution: Grade 1 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards: Cylindrical, Bored and Preassembled Locks & Latches 8...:

Will a Schlage L9000 thumbturn work on a Falcon MA lock?

Resolution: The Schlage 09-509 Rose style thumbturns will work but the spindle sits 90 degrees off from each other (Schlage is square, Falcon is diamond). The result is the throw will end up 10 and 2 o'c...: