Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ falcon el power ”

Resolution: The Von Duprin PS914 power supply with either the 900-2RS or the 900-4RL option board is required.:

What gauge wire is needed for CX red and black power wires?

Resolution: For Product Shipped prior to 8-24-2015 with solenoid and EPT or Door Loops: a. 0-100 ft, use #14 Gauge Wire ...:

What power supply is needed for EL devices?

Resolution: You can use a Von Duprin PS914 power supply with any of the following option boards depending on the application. 900-2RS board will power 1 or 2 devices that do not require timing from pow...:

Can the 8200 power an EL panic device?

Resolution: The 8200 can not supply the power needed on an EL dev ice. The EL device requires a Von Duprin PS914-2RS or PS914-4RL power supply or the older Von Duprin PS873-2 or PS873-4TD models.:

What wire gauge and run is recommended for Von Duprin electric latch retraction EL device?

Resolution: :

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ falcon el power ”

RELATED FAQS