Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ face plate dimensions ”

Resolution: The default backset is 2 3/4" and the latch faceplate dimensions are 1 1/8" x 2 1/4". The latch supplied is the 13-047 deadlatch and 13-048 springlatch.:

Does EL or QEL conversion kit for Von Duprin exit devices contain mechanism cover plate?

Resolution: The conversion kit does not contain a new mechanism case cover plate. If a cover plate is desired, you would need the Fire or Less Dogging Cover Plate for EL/QEL conversion kit and Panic cove...:

What would cause the Von Duprin EL Solenoid not to hold when the mech case cover plate is slid over top of the solenoid?

Resolution: If the cover plate on the mechanism case causes the EL solenoid to drop when slid over the solenoid, then the solenoid plunger requires adjustment. You must lengthen ...:

What are the dimensions of the 993 spacer plate underneath the CO 993 Trim?

Resolution: 13 1/2" Long, 3 5/8" Wide, 1/4" Thick:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ face plate dimensions ”

RELATED FAQS