Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ EXTRA LONG ARM template ”

RELATED FAQS

Resolution: All the templates can be found at us.allegion.com Please click here :

What is the maximum reveal for a regular arm 4642 operator?

Resolution: Max. reveal for a 4642: 4640 Regular arm -- 4.5" 4640 Long arm -- 8" 4640 x ST-3088 ( custom made - extra long rod) -- 8" to 11" No special mounting instructions required, just standard templ...:

Which arm is the same as the 4640 regular arm?

Resolution: The 4640 Regular arm (4640-3077) is the same as: 4040 Long Arm 4820 Regular arm. The arms listed above are for reveals up to 4 1/2" and have a 8 3/8" long rod and shoe. 4640 Long arm ...:

EXTRA LONG ARM

Resolution: XLONG, Top Jamb Installation, Top JAMB, Deep Reveals:

On which closer is the fusible link arm available?

Resolution: The Fusible Link arm is available with the 4010, 4020 and 4110 series closers. They all use the same Fusible Link arm. The UL Listing number is for the Fusible Link arms is R1943.The 4010 Series ca...:

Does LCN still make a 4010SE / 4110 SE?

Resolution: The LCN 4010SE / 4110 SE series are obsolete, and on longer available (discontinued around Aug 1995). They were replaced by the 4040SE series.The 4010SE / 4110 SE track is replaced w...:

Can you mount a 4041 Cush arm with a EDA arm template and get 180 degrees opening?

Resolution: The dead stop post would need to be removed and the 4040/4040XP EDA mounting template for 180° would be followed.:

Can you convert a 4041 Cush arm to a 4041 HCush arm and use the same templating?

Resolution: The 4040XP/4041 Cush and HCush (Hold Open Cush) use the same instructions / template.:

Can I mount an LCN Cush closer with an GJ overhead stop?

Resolution: It would be unnecessary to use the CNS/Cush arm and the Glynn Johnson overhead devices in the same application, both mechanisms stop the door.:

What special template (ST) is used with a 4040XP with a non-adjustable (solid) regular arm for pull side mounting?

Resolution: Special Template ST-2795 is used to mount a non-adjustable (solid) regular arm for pull side mounting. :