Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ exit hardware installation ”

RELATED FAQS

Resolution: The use of Panic Hardware and/or Fire Exit Hardware is required by the International Building Code (IBC) and NFPA 101 – The Life Safety Code, depending on which code and which edition of the code i...:

What is the difference between Panic Hardware and Fire Exit Hardware?

Resolution: The most obvious difference (in the device) is the lack of mechanical dogging on a Fire Rated Device. There are some internal parts that may be different and the method it is secured to the d...:

EXIT HARDWARE

Resolution: RPD, VRPD, Rim Exit, Mortise Exit, Vertical Rod Exit, Surface Vertival Rod, Concealed Vertical Rod:

What is SLM blocking and how does it effect exit device installation?

Resolution: SLM - special laminated material - blocking is put into the wood doors so there is material to mount the exit device using wood screws.:

Do we make a blank trim plate to replace an existing trim?

Resolution: We have several blank trims listed in the price book to cover existing trim prep in door. DEVICE EO TRIM 22 230EO 88 880EO 98/99 990EO or 996EO* 33A/35A Rim, 33/3...:

How do you mount a 55 rim with the 379 where the studs do not line up with the mounting screws?

Resolution: Position the 379L trim and attach with countersunk screw into the bottom stud of the trim. Position the 55 Rim device and attach with the device mounting screw through the head of the de...: