Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ EPT PREP LOCATION ”

Resolution: EPT installation guidelines are as follows: Recommended location is 6" below top hinge per template Steelcraft will locate the power transfer prep at the Von Duprin re...:

Where is the EPT location of a Pin-and-Barrel Continuous HInge?

Resolution: The 600/700 Series EPT Template shows recommended locations based on the standard sizes, The customer can provide a different dimension measured from the top of the hinge to the Cen...:

Where is common cutout for Von Duprin EPT prep in Ives 224 Continuous Hinge?

Resolution: Cutout depends on the size of 224 hinge. See 112HD/224HD-EPT template. 112HD/224HD continuous hinge Center line of EPT to top of the door 83 inches 30 inches 85 inches 32 inc...:

Are EPT preps available on the Paladin Series door?

Resolution: EPT power transfer preparations are available on the Paladin PW14-Series door and FP14-Series frame. Electrified hinges are available on the Paladin PW14-Series door&...:

Can a filler or cover plate be used to blank out a EPT prep on a fire rated frame?

Resolution: Yes, a filler plate can be used to cover an EPT prep as long as it is made from the same material as the frame. This information can also be found in NFPA 80 under Chapter 5 for Field Modifications.:

Can a door have an InPact device and glass lights?

Resolution: Glass lights available: Standard Glass Lights - The N4, N5 & V lite can be used at standard locations with out any modification. Glass Light Options - Other glass lights are available but ...:

ASA-SP

Resolution: 4 7/8" ASA Door Strike Prep with lip @ special location; ANSI A115.2, Door Strike Prep:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ EPT PREP LOCATION ”

RELATED FAQS