Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ept filler plate ”

Resolution: Yes, a filler plate can be used to cover an EPT prep as long as it is made from the same material as the frame. This information can also be found in NFPA 80 under Chapter 5 for Field Modifications.:

What is the replacement for the Locknetics 9100 series electric strike?

Resolution: The Locknetics 9100 series electric strikes are replaced with Von Duprin 6211 and 6210 electric strikes. The 6211 is used if the frame is being replaced. The 6210 is for ...:

Does the SL-Series door have a square edge?

Resolution: The SL-Series door is a square edge non-handed door. A Hinge Filler (also referred to as Hinge Spacer) is the small removable trim part located on the door between hinge leaf and hinge reinforcem...:

FILLER PLATE

Resolution: elevation frame, transom/side light frame:

What size of 2390 replaces the discontinued 1390 device?

Resolution: The 2390 is only available in two sizes, a 21"(overall 24.125" w/ endcaps) and a 24"(Overall 27.125" w/endcaps) unlike the older 1390 which could have been ordered to size. You woul...:

How do I order a Senior Swing header?

Resolution: How to Order: The Senior Swing header is ordered by the width of the door(s). The measurement from inside jamb to inside jamb of the frame. If the Senior Swing header is ordered the wrong len...:

How do I retro fit the 2390 into the 1390 muntin?

Resolution: Replace the device and vertical rods with the current 2390 device and possibly a filler plate. A filler plate may be needed as the older 1390 device was sized per order whereas the 2390 is onl...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ept filler plate ”

RELATED FAQS