Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
ept center line
”
RELATED FAQS
Question
Answer
Where is the EPT location of a Pin-and-Barrel Continuous HInge?
Resolution:
The 600/700 Series EPT Template shows recommended locations based on the standard sizes, The customer can provide a different dimension measured from the top of the hinge to the Cen...:
What is the correct centerline for the 6211 with the BEST 45 H mortise lock?
Resolution:
Center line of the 45H mortise lock and center line of the 6211 electric strike are the same. (both on the same center line):
Is the CS210 adjustable for either a 5 1/2" or 4" door prep?
Resolution:
The CS210 has a patented center-to-center adjustment that will switch from the standard 4" door prep to 5-1/2". Only these two dimensions are available.:
Is the device centerline of the 9975, the same as the centerline of the 6223 strike?
Resolution:
The centerline of 6223 is the same as the centerline of the mortise latch bolt. So the centerline of the mortise latch bolt or center line of the 6223 is 15/32" above the centerline of the device.:
What is the center line of the lock case and the latchbolt on Schlage L9000 series lock?
Resolution:
These dimensions and other general lock case dimensions can be found on template L1. :