Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ept and pivot ”

Resolution: The 2030 Instructions included with the unit has templates for mounting with standard butt hinges, center pivots, and offset pivots.:

What is the new number for the discontinued LCN CP150 center hung pivot?

Resolution: The 7253 is the Ives pivot set that replaced the LCN CP150. :

What hinges can be used on tornado doors?

Resolution: The following hinges are available on Paladin series doors and frames: Butt hinges - 4 1/2" or 5" ball bearing type either standard or heavy duty Continuous hinges - full ...:

What is the difference between the FE and DE-Series frames

Resolution: A Double Egress frame is a double door frame prepared to receive two single-acting doors swinging in opposite directions (both doors are) the same hand. These openings are installed in cross corrid...:

Does LCN or Dor-O-Matic still make a floor closer?

Resolution: Neither Dor-O-Matic or LCN manufacturers a floor closer. :

Can DE-Series frames be prepared for pocket pivot hinges?

Resolution: Pocket pivot hinges are mainly used in cross corridor applications where clear opening width is a factor. For frames, pocket pivot hinges are a special hinge options which must be spe...:

Can a 450 overhead be used on a 48" wide door hung with butt hinges or offset pivots?

Resolution: The 455 can be mounted on a 48" wide door, but we cannot guarantee that it will withstand the forces involved. Recommend using 906 instead.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ept and pivot ”

RELATED FAQS