Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
engage programming fob
”
RELATED FAQS
Question
Answer
Schlage Engage and Control Locks - Using Control "Construction Fobs" on Other Devices
Resolution:
Construction fobs for the Control locks can also be used for the other Engage locks.Follow the instructions in the users guide for each of the locks (NDE, LE, CTE) to put it construction ...:
When adding a credential or updating a credential I get an error that the No Tour Credentials Are Full.
Resolution:
The No Tour function only allows writing to 11 sectors on the fob. Each lock added to a user uses 1 sector. Once those 11 sectors are full, No Tour is not available. You can still ...:
Schlage Engage - "Credential has been used in the past and cannot be reused" Error
Resolution:
This error indicates the credential was previously designated as a master credential on that site and was deleted. Deleted master credentials cannot be used again on the same site. Recommend ...:
What versions of Microsoft Windows are compatible with Schlage Express version 4.4.2?
Resolution:
Microsoft Windows 8, 7, Vista, and XP: Home, Basic, and Starter versions are not compatible with Schlage Express. What versions of Microsoft Windows are compatible with Schlage Express v...:
Can the low coin cell Nuisance delay be Disabled on a CO200?
Resolution:
The coin cell is ignored when the lock sets are used with Manual Programming ONLY or while in Construction mode.:
How do I manually change PIN length on an AD200?
Resolution:
Beginning with Firmware Packages ADFwPkg 2.16.3 and COFwPkg 1.20.0 the PIN length can be manually changed for AD200 and CO200 locks as follows: 1. Press {programming code (default is 97531)} then ...:
How do I program my device?
Resolution:
The programming processes for Allegion devices can be both product and features specific. Some products programming processes are electronic in nature, others are physical in nature. &nb...:
Why do I get error message "E701 - Programming Lock Failed" on my Hand Held Device while programming an AD lockset?
Resolution:
Update your lockset using ADFwPkg 2.19.0 or higher. This new firmware update resolves this programming error problem (E701) and the error will no longer be presented.:
Why doesn't my AD lock go into Construction Mode?
Resolution:
Update your device firmware to the latest version to fix this early design / feature update:
How do I program Locknetics CM / CL legacy locks with the Schlage Utility Software (SUS) and Hand Held Device (HHD)?
Resolution:
- With the CIP NOT inserted and the Schlage Utility Software (SUS) running o Enter the Master Programming PIN or Present Loc...:
Can I have multiple Hand Held Devices (HHD) coupled to the same lock?
Resolution:
The Coupling Password is compared whenever an HHD is trying to adjust lock configuration settings or downloading door programming files.:
What is the CO-220?
Resolution:
The Schlage CO-220 is standalone classroom lock down solution with remote fob and visual indicator which allows immediate local lock down by simply pushing the button on the remote fob from anywher...:
How do you order/read an order for contsruction fobs for the Control lock?
Resolution:
Example order info looks like this:Credentials.9651.CT8X4248.48x.963.100.100.1.10.01-Standard Default.No6….Here is the breakup:Credentials.Part#. CardTrax Account#.Bit Format. FC. Internal Start#.E...:
New Dual Prox and IButton fob part number
Resolution:
There are two new credentials available which allows a facility currently using iButtons credentials to transition to proximity credentials. Since the new AD and CO series units no longer supp...: