emergency tool nd

RELATED FAQS

Question
Answer
Only the lever return spring is available.
Related solution: What is the part number for the lever return spring for the old M series mortise lock?
The emergency keys are shipped with each lock.  The part numbers are; 61-509 standard and 61-510 large bow size.
The ND40 outside emergency button and the ND44 outside emergency turn button can disengage from the lever and fall out when they are not assembled properly.Click here for emergency button...
 If the button and plunger or emergency cylinder are damaged they can be ordered separately.  Part numbers are below.  Emergency Button and Plunger (ND40) - N123-034Em...
The lever removal tool can be used to remove levers in both the ND and the L Series mortise locks.
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project.  This tool can be used for Schlage ND-Series ...
The blue lever tool remover, 24002693, is not shipped in every box. The existing wire spring lever removal tool will be included in every box.  
Bath/Bedroom Privacy Lock - Outside Lever Can be opened from outside with small screwdriver or emergency release tool - the Inside lever has Push-button that locks outside lever. Turning inside lev...
Privacy Lock - Can be opened from outside with small screwdriver or emergency release tool. Inside Push-button locks outside lever. Turning inside lever or closing door releases button. Inside lev...
Privacy lock—Latch bolt by knobs. Outside knob locked by push button in inside knob. Rotating inside knob or closing door releases push button. Emergency release in outside knob. Emergency Release ...
L9040 locks WITHOUT indicator uses an emergency tool available in the price book, L583-233.L9040 locks WITH an indicator requires a small flat blade screwdriver.
The L583-233 emergency key spindle length is 1.575"The L583-233 emergency key will operate on a door thickness up to 3" extended equally. 
On June 2, 2020 the spring cage on the ND series dummy functions changed design from a assembled machined spring cage to the new single cast spring cage.  See pictures here : C...
A flat head screwdriver can be used or the 35-250 emergency key.