Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ELECTRIC STRIKE PART NUMBER BREAK DOWN ”

Resolution: Strike or ridged plate with ridges part number is 970323622.:

What is the part number for the 6210 spring and lip replacement package?

Resolution: You can replace the 6210 spring and lip, part number 050940-00.:

What is the part number for a blade stop shim for a 6111 or 6113 electric strike?

Resolution: 010055-xx is the part number for Blade Stop Shim kit for 6111 or 6113 electric strike and it must be ordered separately. xx is for the finish callout.:

Are the solenoids for Von Duprin 6000 Series Electric Strikes replaceable?

Resolution: The Von Duprin 6100 and 6200 Series Electric Strike solenoids are replaceable.The replacement solenoids can be used to convert a 6100 or 6200 Series Electric Strike by ordering the appropriate sole...:

Can 24 volts be run to a 12 volt 6000 series electric strike solenoid?

Resolution: You can't run 24VDC into the 12VDC electric strike, over voltage such as this will cause the solenoid to heat up and damage the solenoid. You must change to a 24V solenoid, part number 050240-00.:

Does Schlage offer a rabbetted latch and strike kit?

Resolution: Schlage does offer rabbetted latch and strike kit: Part number, 39-030, for cylindrical locks and deadbolts. Part number, 10-075, for the L9000 mortise locks. Monarch does not offer rabbette...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ELECTRIC STRIKE PART NUMBER BREAK DOWN ”

RELATED FAQS