Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ electric strike for nd ”

Resolution: Schlage offers the 10-042 Electric strike, 1 1/4" x 4 7/8", 606 and 626 finish only. Related solution: What are the current and voltage requirements of ...:

Which electric strike do I use for cylindrical locks used in a single door?

Resolution: The 6211 would be the most common electric strike to be used with cylindrical locks on a single door application. Check the template to confirm compatibility with specific cylindrical lock model n...:

Is there an electric strike that will work with the 2670 Guard X?

Resolution: The Von Duprin 2670 Guard X does not have a spring loaded latch bolt, it is a dead bolt and will not operate with any electric strikes.:

Can you power a electric strike from the 7900 control boxes?

Resolution: The power supply output in the 7900 series control box is a 12VDC output, rated at (1/4A) 0.250A. It cannot be used to power a strike or maglock. You need to have a separate power supply for the st...:

Will the 6300 electric strike work with the 22 series rim device?

Resolution: The 6300 surface mounted electric strike can be used with a 22 rim device.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ electric strike for nd ”

RELATED FAQS