Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ EL WIRING SCHEMATIC ”

RELATED FAQS

Question
Answer
What is the part number for EL Wiring Adaptor?
Products shipped on or after August 8, 2012 no longer require the EL wiring adaptor.
  The part number for EL wiring adaptor is 44486876-00.  The part number contains two adaptors.
Is the the PS914 EL wiring adapter needed for Von Duprin Chexit device?
The EL Wiring Adapter is not needed for a CX device.
How is a ELR or panic device wired to a Senior Swing?
 EL devices are wired to the Senior Swing, using the P10 (761465) cable.  Connect the "GRAY" wire to the SC terminal on the 900-2RS card in the Von Duprin Power Supply and the "VIOLET" wire to the ...
Common wiring diagrams
The following common wiring diagrams are available: One Single Door with Panic Bar   Electric Latch Retraction, with Auto Operator Delayed egres...
Electronic Protocols:   Access Control Door with electric trim Access Control with electric strike  Access control with electric strike and LCN 460...
Are CAD drawings available for Steelcraft?
CAD drawings are available for doors and frames in 3 drawing formats: Autocad (.dwg) - Release 12 Encapsulated PostScript (.eps) Data Exchange (.dxf) Drawings are available on the...
Does the QEL device come with the EL wiring assembly?
Yes, the QEL device includes a cable assembly part number 110388-00.Since 12/2014, that cable comes in a package (part 116549) with the long cable mentioned above and the small cable that plug...
Is the 900-ELK wiring adaptor required when using the PS914 power supplies?
Products shipped on or after August 8, 2012 no longer require the EL wiring adaptor. The ELK Wiring Adaptor (900ELK) was used only when using the PS914 power supply with either the 900-2RS or...
Is there a wiring diagram for EL and Von Duprin PS914-2RS power supply?
Reference The 914 Installation instructions.
Are the EL wiring harnesses still required with the new potted module?
EL wiring harness is no longer needed with new EL potted modules.
Is the EL wiring adapter needed for QEL?
The EL wiring adapter is not needed for QEL devices.