Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ El solenoid weak ”

Resolution: The threaded bushing on the solenoid plunger requires 8-9 threads showing to operate correctly.:

What would cause the Von Duprin EL Solenoid not to hold when the mech case cover plate is slid over top of the solenoid?

Resolution: If the cover plate on the mechanism case causes the EL solenoid to drop when slid over the solenoid, then the solenoid plunger requires adjustment. You must lengthen ...:

What Von Duprin solenoid crosses over to the solenoid part number 971687?

Resolution: If you are trying to replace Von Duprin EL solenoid part number 971687, the sellable part number for the solenoid and plunger is 050535. Please note that the solenoid is rarely the cause of E...:

What is needed to keep the EL device retracted all day?

Resolution: To keep the Von Duprin electric latch retraction EL or QELA exit device dogged (retracted) all day, have your access control, Key pad, key switch, fire alarm contact or any other signals ...:

What is the part number for the ND solenoid?

Resolution: The new motor driven ND electrified locks shipped after March 14, 2016 do not require a solenoid. The Schlage ND-Series electrified locks shipped prior to March 14, 2016 would have used a...:

Are the Falcon EL solenoids rated for continuous duty?

Resolution: The Falcon EL devices can be operated in a continuous duty cycle.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ El solenoid weak ”

RELATED FAQS