Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ el conversion have rx lx ”

Resolution: The attached table shows the part numbers for LX-RX and LX-RX-LC switches field installed.:

Is there a template that shows where to drill the hole for E/EL/SS/RX/LX/CX wires?

Resolution: The hole should be drilled in the field once the end cap is located on the door. It is a 5/8" hole, that is located 5/16" from the end of the mechanism case. See installation instruction of t...:

Is there a conversion kit to add Electronic Dogging (ED) or Electric Latch Retraction (EL) to a 1690 or 1790 in the field?

Resolution: There is no conversion kit to add EL or ED to an existing 1690 or 1790 series device. All of the components are built into the device, since the device does not have a separate base...:

Can the EL or QEL conversion kit be used on the old Von Duprin 33/35 exit device?

Resolution: Current EL and QEL baseplate conversion kits can be used on all latching types of the 33/35 series (non "A" version which were manufactured prior to 2003). At one time, the obsolete black EL ...:

Where is the Deadbolt Monitor, Latchbolt Monitor, RX Switch, EL/EU Switch and Motor Assembly located in an L9000 Electrified Lockcase?

Resolution: The Lock Case above is shown with the Simultaneous Retractor in place.:

What is (SD) Special Dogging?

Resolution: SD is Special cylinder dogging in the center case of 98/99 rim and vertical rod non fire rated devices and is available with standard, EL, QEL, CX and ALK.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ el conversion have rx lx ”

RELATED FAQS