dummy bar with mullion

RELATED FAQS

Question
Answer
The 250DT is a dummy touchbar for both the 24 and 25 devices.  It is a dummy bar with end caps on each end, no center case.
The 330 must be ordered as a RX330 to have the RX switch.  You can NOT add a RX to an existing dummy 330 bar.
Full dummy trim - Knob/lever on both sides is fixed by mounting bar.
Half dummy trim - Knob/lever on one side is fixed by mounting bar. N escutcheon only. Not recommended for use on wood doors.
Steelcraft does not manufacture 12 gage closed section mullions. The maximum is 14 gauge. Steelcraft can provide the outer perimeter  (open sections only)  of a transom frame in 12 gage material. ...
Mullion, Transom Bar, Corner Post; elevation frame, transom/side light frame